Accessories
aFrame
Apparel
Commercial
Earbuds
Ghost Series
Home Theater Models
In-Ceiling Models
In-Room Models
In-Wall Models
Installer Tools
Oasis Labs
Outdoor Speakers
Power Amplifiers
Speaker Grills
Subwoofers
Volume Controls
Power Distribution
Find a Rack By Size
Stealth Series Racks
Thin Line Series Racks
Pre-Assembled Racks
Pre-Configured Racks
Wall Mount Racks
General Accessories
HDMI Cables
Bulk Cable
Acoustic Treatments
Arlington
Docking Solutions
HDMI Products
Surge Elimination
Thermal Management
TV Mounts

Trunami In-Wall Subwoofer and Subwoofer Amplifier Package
Includes:
1 - Trunami-Sub In-Wall Subwoofer
1 - TRU-S350 Subwoofer Amplifier
Part Number: Trunami-Pak
Included Part Numbers: (1) TRU-S350, (1) TRUNAMI-SUB
|
In-wall passive subwoofer, dual 8" injected poly woofers, 200 watts. 5 - 200 watts, 8 ohms. Sold each.
Part Number: IW-Sub-8
|
Featuring High-Excursion-Spider-Suspension (HESS) designed 8" woofer for deep bass, linearity and break-up mode control at high drive levels. Two 6.5" Bass Augmenting Drivers (BAD) to enhance the bass while keeping the dimensions of the Trunami cabinet to a minimum. Tuned to vibrate in response to the bass energy coming from the woofer, the BAD's extend the Trunami bass a full -3db@37Hz when mounted mid wall near the floor. This gives the Trunami the aural perception of bass notes roughly half an octave lower than it would otherwise be able to reproduce.
The Trunami is small enough to mount between a 16" stud in a standard thickness wall. Coming complete with its own MDF back box, the Trunami is retrofittable. The Trunami also features a frameless, magnetic cloth grill that is both easy to install and minimizes the on-wall footprint.
Finally, the use of multiple subs to prevent areas of bass null regions in a room of very low bass is fast becoming the norm in installations. In keeping with that trend, the Trunami has been designed to work as a single unit or in 2- or 4-unit configurations to minimize waves and phase cancellations in larger rooms.
The Trunami is small enough to mount between a 16" stud in a standard thickness wall. Coming complete with its own MDF back box, the Trunami is retrofittable. The Trunami also features a frameless, magnetic cloth grill that is both easy to install and minimizes the on-wall footprint.
Finally, the use of multiple subs to prevent areas of bass null regions in a room of very low bass is fast becoming the norm in installations. In keeping with that trend, the Trunami has been designed to work as a single unit or in 2- or 4-unit configurations to minimize waves and phase cancellations in larger rooms.
Part Number: TRUNAMI-SUB
|
|
In-wall enclosure, 1/2" MDF board with internal bracing. Fits model: IW-SUB-8. Sold each.
Part Number: EL-WSUB
|
|









