Accessories
aFrame
Apparel
Commercial
Earbuds
Ghost Series
Home Theater Models
In-Ceiling Models
In-Room Models
In-Wall Models
Installer Tools
Oasis Labs
Outdoor Speakers
Power Amplifiers
Speaker Grills
Subwoofers
Volume Controls
Power Distribution
Find a Rack By Size
Stealth Series Racks
Thin Line Series Racks
Pre-Assembled Racks
Pre-Configured Racks
Wall Mount Racks
General Accessories
HDMI Cables
Bulk Cable
Acoustic Treatments
Arlington
Docking Solutions
HDMI Products
Surge Elimination
Thermal Management
TV Mounts
4-point mounted, adjustable depth sliding shelf. 1U with 75 lb. load capacity.
Click Here for Spec Sheet
Part Number: R-SHELFSLD-1U
Standard equipment shelves, but without the front lip. Commonly used with custom faceplates and equipment with no feet.
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
Part Number: R-SHELFNL-4U
Sturdy, easy-to-install shelves for non-rack mountable equipment
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
Part Number: R-SHELF-3U
Standard equipment shelves, but without the front lip. Commonly used with custom faceplates and equipment with no feet.
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
Part Number: R-SHELFNL-3U
Sturdy, easy-to-install shelves for non-rack mountable equipment
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
Part Number: R-SHELF-2U
Standard equipment shelves, but without the front lip. Commonly used with custom faceplates and equipment with no feet.
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
Part Number: R-SHELFNL-2U
Sturdy, easy-to-install shelves for non-rack mountable equipment
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
Part Number: R-SHELF-1U
Standard equipment shelves, but without the front lip. Commonly used with custom faceplates and equipment with no feet.
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
- Solid 16-gauge design
- Vented panels for improved heat dissipation
- Multiple cable management holes punched at rear of each shelf
- Accommodate equipment up to 17.2 inches wide
- L-Brackets can be installed in vent slots for better securing of equipment
- For heavier equipment, shelf-support frames are recommended
Part Number: R-SHELFNL-1U
Used to prevent shelf-mounted equipment from being pushed back into the rack as front buttons are pressed. Sold in plastic bottle containing 20 pcs.
Part Number: R-LBRKT-B20
